Installing The Avaya G700 Media Gateway - Avaya S8700 Installing Manual

Installing the Avaya™ S8700 Media Server with Avaya™ MCC1 or SCC1 Media Gateway

Installing the Avaya G700 Media Gateway

An Avaya G700 Media Gateway or an Avaya G700 Media Gateway with an S8300 Media
Server configured as a Local Spare Processor (LSP) may be added to either a S8700
Multi-Connect or IP Connect configuration. To add a G700 Media Gateway, you must have a
TN799DP C-LAN circuit pack installed in the MCC1, SCC1, or G600 Media Gateway. The
G700 is an endpoint on the C-LAN circuit pack. A sample configuration is shown in
configuration showing an Avaya MCC1 Media Gateway with an Avaya G700 Media Gateway''
on page 96.
The general process for adding an Avaya G700 Media Gateway to an existing Avaya MCC1,
SCC1, or G600 Media Gateway follows:
Install the MCC1, SCC1, or G600 Media Gateway
•
Install and configure the G700 Media Gateway.
•
• Add the media gateway to the S8700 translations
Install a TN799DP (V5 or higher) C-LAN circuit pack
•
• Administer the C-LAN circuit pack by
• Adding the node names and IP addresses for each G700 Media Gateway being
added on the IP Node Names screen
• Filling in the required fields on the IP Interfaces screen
Enabling the Ethernet port.
•
For more information on administering a TN799DP C-LAN circuit pack, refer to the
document Adding Hardware to the MCC1, SCC1, and G600 Media Gateway section,
TN799DP Control LAN ,on the Avaya™ S8300 and Avaya™ S8700 Media Server
Library CD.
For complete information on how to install and configure an Avaya G700 Media Gateway, refer
to Installation and Upgrades for the Avaya™ G700 Media Gateway controlled by an Avaya™
S8300 Media Server or an Avaya™ S8700 Media Server (555-234-100).
May 2003
95
''Sample