Post-Upgrade Tasks - Avaya g700 Installation And Upgrades

Upgrading an existing S8300A to R3.0 using the Wizards
Note:
Avaya P330 Stack Processors now support a "Faststart" or "Portfast" function,
Note:
because the 802.1w standard defined it. An edge port is a port that goes to a
device that cannot form a network loop.
To set an edge-port, type set port edge admin state module/port
edgeport.
For more information on the Spanning Tree CLI commands, see the Avaya P330T User's Guide
(available at http://www.avaya.com/support).

Post-upgrade tasks

Complete the following tasks after you have finished the upgrade:
If using IA770:
1. Restore AUDIX data
2. Saving translations
3. Installing IA770 service pack (or RFU) files and optional language files, if any
Complete the upgrade process (S8300 is the primary controller):
4. To check media modules
5. To enable scheduled maintenance
6. To busy out trunks
7. To check for translation corruption
8. To resolve alarms
9. To re-enable alarm origination
10. To back up the system
11. To restart LSPs (if any)
270 Installation and Upgrades for Avaya G700 Media Gateway and Avaya S8300 Media Server
on page 271
on page 276
on page 277
on page 277
on page 277
on page 277
on page 277
on page 278
on page 278
on page 278
on page 276