Install Updated License And Authentication Files - Avaya g700 Installation And Upgrades

Upgrading an existing S8300B to R3.0 using the Wizards
8. Type update_activate update, where update is the release or issue number of the
latest software update file. (For example, 00.0.339.4-xxxx. Do not use the .tar.gz
extension at the end of the file name). Press Enter.
The media server may reboot (reset system 4). If it reboots, it also may display the message
/opt/ecs/sbin/drestart 2 4 command failed.
Ignore this message. You must wait until the restart/reset completes before entering
additional commands.
The media server displays a message that the software update (patch) was applied.
9. Type update_show again and press Enter to list Communication Manager files to verify
the new software update file was activated.

Install updated license and authentication files

To install the license and authentication files:
1. On the Maintenance Web Interface menu under Security, select License File.
The system displays the License File screen.
License File Screen
2. Select Install the license file I previously downloaded and click Submit.
The system tells you the license is installed successfully.
312 Installation and Upgrades for Avaya G700 Media Gateway and Avaya S8300 Media Server