Upgrade of an existing S8300B to R3.0 with manual upgrade of G700 firmware
This screen displays, if and only if:
IA770 is/is not supported, and
●
The server is not an LSP.
●
The radio buttons default as follows: If IA770 is not supported, the "no" button will be selected; if
IA770 is supported, the "yes" button will be selected.
The install screens following the IA770 screen are unchanged from their former versions.
1. Click Continue.
The S8300 displays the Choose License Source screen.
Choose License Source screen
2. If you have installed the license and authentication files, select the following:
- I want to reuse the license files from the currently active partition on this server.
- Do not update authentication information.
For a normal installation, the license and authentication files should have been installed at
this point. If these files have not been installed, select the following:
- I will supply the license/authentication files myself when prompted later in this process.
- Update authentication information as well as license information.
668 Installation and Upgrades for Avaya G700 Media Gateway and Avaya S8300 Media Server