Avaya g700 Installation And Upgrades page 151

You can choose any of several Wizard Usage options. For a new installation, you could select
the Install a Primary Controller radio button if the S8300 were going to be operated in primary
controller mode; or you could select one of the LSP options, depending on the type of primary
controller the system has. Leave the IP Defaults checkbox unchecked.
Note:
One of the options is an upgrade of a previously installed media server with new
Note:
software and/or media gateway firmware. This is the option you would choose in
an upgrade-only scenario.
When you are finished with this screen, click Continue, after which you will be asked to confirm
your choice of Wizard Usage before continuing.
After reviewing a checklist of required and optional items for continuing the installation, you then
have the option to run the nvram initialize command, which restores all factory default
settings on all available media gateways, as well as the P330 Stack Processor. For a new
installation, this is unnecessary.
Click Continue to begin the Media Server tasks. The first screen to display is the Date/Time
screen.
Date/Time screen
In this screen, you can choose to use the current date and time information that the IW detects
on the S8300, or you can reset the date, time, and time zone. When you are finished, click
Continue.
Using the Avaya Installation Wizard (IW)
Issue 8.1 June 2005 151