Connecting The Cables - Avaya g700 Installation And Upgrades

To power up—DC input (optional)
The P333T-PWR switch can operate on the AC input only. However, you may wish to use the
optional DC input for the following:
To backup the power over Ethernet ports
●
To provide more than 200 watts for the power over Ethernet ports
●
Note:
Please refer to the P333T-PWR switch User's Guide for more information.
Note:

Connecting the cables

To connect IP telephones, PCs, servers, routers, workstations, and hubs:
1. Connect the Ethernet connection cable (not supplied) to a 10/100 megabits per second port
on the front panel of the Avaya P333T-PWR switch.
Note:
Use standard RJ45 connections and a CAT5 cable for 100 megabits per second
Note:
operation.
2. Connect the other end of the cable to the Ethernet port of the PC, server, router,
workstation, IP telephone, switch, or hub.
Note:
Use a crossover cable when connecting the Avaya P333T-PWR switch to a
Note:
switch or hub.
3. Check that the appropriate link (LNK) LEDs light up.
Installation and wiring of telephones and power supplies
Issue 8.1 June 2005 359