Configure The G700 - Avaya g700 Installation And Upgrades

Installing a new G700 without an S8300
Table 9: Firmware file formats (continued)
Component
24-Port DCP Media Module
8-port/trunk Analog Media Module
4-station/4-CO trunk Analog
Media Module
T1/E1 Media Module
8-port BRI Media Module
2-port BRI Media Module
4. Double-click the file name.
The system displays a File Download window.
5. Click on Save this file to disk.
6. Save the file to the C:\tftp directory (or your alternate tftp location).
7. Use WinZip or another zip file tool to unzip the file, if necessary.

Configure the G700

For a new installation of a G700 Media Gateway, you must complete the following configuration
tasks:
Note:
The Avaya Gateway Installation Wizard (GIW) performs these tasks
Note:
automatically.
Assigning the IP addresses of the G700 media gateway components
●
- Assigning the IP address for the P330 Stack Processor
- Establishing IP routing for the stack
- Assigning the IP address to the G700 media gateway processor
- Assigning the default IP route to the G700 media gateway
- Assigning IP addresses to the VoIP resources
- Checking for IP connections
190 Installation and Upgrades for Avaya G700 Media Gateway and Avaya S8300 Media Server
Firmware Version
Format
mm717<version id>
mm711<version id>
mm714<version id>
mm710<version id>
mm720<version id>
mm722<version id>
Example
mm717v2.fdl
mm711h20v60.fdl
mm714v60.fdl
mm710v9.fdl
mm720v4.fdl
mm722v2.fdl
2 of 2