Avaya g700 Installation And Upgrades page 465

11. If you clicked the LSP option with an S8500 or S8700-series, complete the additional fields
as follows:
CLAN IP address of the primary controller — the IP address of any CLAN board in the
S8700-series media server configuration.
IP address of server 1 (required) — the IP address of the primary S8700-series server.
IP address of server 2 (optional) — the IP address of the duplicated primary S8700-series
server. If server 2 is present, this specific IP address must also be entered.
IP address of secondary server 1 (optional) — the IP address of the secondary
S8700-series server.
IP address of secondary server 2 (optional) — the IP address of the duplicated
secondary S8700-series server
Note:
The CLAN boards must be TN799DP running version 5 or greater firmware. Be
Note:
sure to check the firmware version for these boards on the S8500 or
S8700-series. For information on how to upgrade the firmware on the S8500 or
S8700-series, please see the section "Upgrade Firmware in Selected Port
Cabinet Packs" in Upgrading the Avaya Media Server Configuration in the
S8700-series documentation portion of the Documentation for Avaya
Communication Manager, Media Gateways and Servers CD, 03-300151.
12. If you clicked the LSP option with an S8300, simply enter the IP address of the S8300
server.
13. Click Continue.
The Ethernet Adjuncts screen appears.
Ethernet Adjuncts Screen
Install the S8300
Issue 8.1 June 2005 465