Avaya g700 Installation And Upgrades page 116

Checklist 1: Install New G700 with an S8300 (Primary or LSP) (continued)
Major Tasks
Configure the G700 Media
Gateway (See
Installation Wizard (IW)
page 148
Install new firmware on the
G700 and media modules (See
Using the Avaya Installation
Wizard (IW)
Installing IA770 service pack
files, if any
Administer Communication
Manager
Considerations for IP Phones
Supported by a Local Survivable
Processor
Complete the Installation of the
S8300 (if the Primary
Controller)
116 Installation and Upgrades for Avaya G700 Media Gateway and Avaya S8300 Media Server
Using the Avaya
on
on page 148
on page 157
on page 160
on page 177
on page 179
Subtasks
-Assign IP addresses to the G700 processors
-Set up default IP route for the G700
-Check IP connections
-Set up controller list for the G700
- Configure X330 Expansion Module, if
necessary
-Verify contents of the tftp directory
-Determine which firmware to install
-Install firmware on the P330 Stack Processor
-Install firmware on the G700 media gateway
processor
-Install firmware on the media modules
-Install firmware on other G700s in the stack
or network, if any
-Set Rapid Spanning Tree
- Log in to the S8300 platform
- Install IA770 service pack, if any
- Stop the system
- Restart the system
- Enable messaging on the S8300 Web
interface, if necessary
- Reboot the system
- Assign node names, if necessary
- Administer network regions
- Assign LSPs to network regions
- Administer IP interfaces
- Administer the LSP form
- Add media gateway
- Verify changes
- Enable announcements, if necessary
- Save translations
- Register the system
- Back up the system
- Check planning documentation
- Connect and administer test endpoints
- Complete electrical installation
- Enable adjunct systems
2 of 3