Replacing The S8300A With The S8300B Media Server - Avaya g700 Installation And Upgrades

Media gateway and media server

Hide thumbs Also See for g700:

Table of Contents

Linux Migration - Backup Status screen

The screen will show Backup is finished when the backup is completed.

However, also verify that the message, Backup Successful also appears in the

last line. If any error messages appear stating that the backup failed, follow the

normal escalation procedures.

Replacing the S8300A with the S8300B Media Server

To remove the S8300A and insert the S8300B

1. On the Maintenance Web Interface, under Server select Shutdown Server.

2. Select the Delayed Shutdown option and uncheck the "Restart server after shutdown,"

3. Click the Shutdown button.

Click OK to confirm.

4. When the OK to Remove LED on the S8300 faceplate goes on steady, it is safe to remove

Be sure to wear a properly grounded ESD wrist strap when handling the S8300

Media Server. Place all components on a grounded, static-free surface when

working on them.

5. Loosen the two thumb screws on the S8300 faceplate.

Upgrading the S8300A

Issue 8.1 June 2005