Chapter 8: Telephones And Adjunct Systems - Avaya g700 Installation And Upgrades

Chapter 8: Telephones and adjunct systems

This section provides information on connecting telephones and other adjunct systems. To
install and wire telephones and connect their power supplies, follow the instructions in
Installation and wiring of telephones and power supplies
●
Complete the telephone installation process
●
In addition, you may need to install one or more adjunct systems or devices. Follow the
instructions in:
IA 770 INTUITY AUDIX messaging application
●
INTUITY AUDIX LX messaging system
●
ASAI co-resident DEFINITY LAN gateway (DLG)
●
Call center
●
Avaya Integrated Management
●
Uninterruptible power supply (UPS)
●
Terminal server installation
●
Call detail recording (CDR)
●
Reliable Data Transport Tool (RDTT) package
●
Printers
●
DS1/T1 CPE loopback jack
●
External modems
●
Busy tone disconnect equipment for non-U.S. installations
●
Music-on-hold
●
Paging and announcement equipment
●
Adjunct Information Sources
●
For these adjunct systems, consult the documentation specific to the system for complete
installation instructions.
Your planning documentation specifies the equipment you will be installing.
!
WARNING:
To reduce the risk of fire, use only 26 AWG or larger telecommunication line
WARNING:
cords when installing telephones or adjuncts.
on page 366
on page 376
on page 390
on page 395
on page 396
on page 411
on page 414
on page 360
on page 362
on page 364
on page 369
on page 374
on page 394
on page 418
on page 419
on page 334
on page 364
on page 413
Issue 8.1 June 2005 333