Completing The Upgrade Process (S8300 Is The Primary Controller) - Avaya g700 Installation And Upgrades

Upgrading an existing S8300B to R3.0 using the Wizards
5. Click on the service pack file name for this release.
For example, C6072rf+b.rpm.
6. Click on Save and browse to the location on your laptop where you want to save the file.
Note:
The IA770 patch documentation is co-located with the patch software.
Note:
7. Under IA 770 INTUITY AUDIX Messaging Application, click on Installation, Migrations,
Upgrades & Configurations.
8. Click on IA770 INTUITY AUDIX Release 3.0 Installation.
This opens the window that contains the document for installing IA770 software.
Completing the upgrade process
(S8300 is the primary controller)
Telnet to the S8300 (primary controller) and open a SAT session:
1. To check media modules
2. To enable scheduled maintenance
3. To busy out trunks
4. To check for translation corruption
5. To resolve alarms
6. To re-enable alarm origination
7. To back up the system
8. To restart LSPs (if any)
To check media modules
1. Type list configuration all and press Enter.
2. Verify that the software is communicating with all media modules and that all media
modules are listed in the reports.
3. Make test telephone calls to verify that Communication Manager is working.
To enable scheduled maintenance
1. Type change system-parameters maintenance and press Enter.
2. Ensure that the Start Time and Stop Time fields' administration is the same as before the
upgrade.
320 Installation and Upgrades for Avaya G700 Media Gateway and Avaya S8300 Media Server
on page 320
on page 320
on page 321
on page 321
on page 321
on page 321
on page 321
on page 321