Install Firmware On The G700 And Media Modules; Configure An X330 Expansion Module (If Necessary) - Avaya g700 Installation And Upgrades

Setting up the media gateway controller list
●
Setting the LSP Transition Points
●
However, the GIW does not configure an X330 Expansion module. This task you must perform
manually, as described in:

Configure an X330 Expansion Module (If Necessary)

●

Install firmware on the G700 and media modules

The Avaya Gateway Installation Wizard (GIW) can perform the installation of new firmware on
the G700 and media modules automatically. Before installing new firmware on the G700
processors and media modules, the GIW:
Accesses the P330 Stack Processor
●
Verifies the contents of the tftpboot directory
●
Following this the GIW performs the procedures:
Installing New Firmware on the P330 Stack Processor
●
Installing new firmware on the G700 Media Gateway Processor
●
Installing new firmware on the media modules
●
Configure an X330 Expansion Module (If Necessary)
User Guides and Quick Start Guides for the expansion modules are available on the Avaya
Support web site:
To configure an X330 Expansion Module
1. Go to the Avaya Support web site: http://avaya.com/support.
2. In the list on under Technical Database, click on LAN, Backbone, and Edge Access
Switches.
3. Under Wiring Closet & Distribution, click on P330 Stackable Switching System.
4. Click on All Documents.
5. Select the appropriate document for the expansion module you are installing.
Install firmware on the G700 and media modules
Issue 8.1 June 2005 191