Configuring Network Parameters - Avaya g700 Installation And Upgrades

Upgrading an existing S8300A to R3.0 using the Wizards

Configuring network parameters

Note:
For this procedure, you must have the host name, subnet mask, and IP address
Note:
of the S8300, and the IP address of the default gateway.
Because the software upgrade resets the configuration data, you must reconfigure the network
parameters on the S8300 before restoring the backup files. Also, it is possible that the new
software added or changed some of the configuration fields or screens.
To configure network parameters
1. Under Server Configuration click Configure Server to start the configure server process.
2. Click Continue through the Review and Backup Notices to get to the Specify how you
want to use this wizard screen.
Specify how you want to use this wizard screen
3. Select Configure individual services and click Continue.
4. Click Configure Interfaces from the "Configure Individual IP Services" list on the left.
The Configure Ethernet Interfaces screen displays.
254 Installation and Upgrades for Avaya G700 Media Gateway and Avaya S8300 Media Server