Avaya g700 Installation And Upgrades page 195

To define IP network region 1
!
CAUTION:
Defining IP network regions can be quite complex. For detailed information on
CAUTION:
the use and administration of IP network regions, see ''Administration for Network
Connectivity for Avaya Communication Manager, 555-233-504.''
1. At the SAT prompt, type change ip-network-region 1.
The S8300 displays the IP Network Region screen.
IP Network Region Screen
change ip-network-region 1
Region: 1
Location:
Name:
MEDIA PARAMETERS
Codec Set: 1
UDP Port Min: 2048
UDP Port Max: 3028
DiffServ/TOS PARAMETERS
Call Control PHB Value: 34
Audio PHB Value: 46
802.1P/Q PARAMETERS
Call Control 802.1p Priority: 7
Audio 802.1p Priority: 6
H.323 IP ENDPOINTS
H.323 Link Bounce Recovery? y
Idle Traffic Interval (sec): 20
Keep-Alive Interval (sec): 5
Keep-Alive Count: 5
2. If necessary, complete the fields as described in ''Administration for Network Connectivity
for Avaya Communication Manager, 555-233-504.''
Note:
It is strongly recommended to use the defaults in the screen. However, for the
Note:
RTCP Enabled and RSVP Enabled fields, the entry should be n (no).
3. Press F3 (Enter) to submit the screen.
IP NETWORK REGION
Home Domain:
Intra-region IP-IP Direct Audio: yes
Inter-region IP-IP Direct Audio: yes
IP Audio Hairpinning? y
RTCP Reporting Enabled? n
RTCP MONITOR SERVER PARAMETERS
Use Default Server Parameters? y
AUDIO RESOURCE RESERVATION PARAMETERS
Administer Communication Manager
Page 1 of
RSVP Enabled? n
Issue 8.1 June 2005
19
195