Assigning Node Names And Ip Addresses For The C-Lans And Lsps - Avaya g700 Installation And Upgrades

Administering IP Interfaces
●
Administering the LSP Form
●
Note:
For information on installing the CLAN boards on the S8500 or S8700 port
Note:
networks and complete information on installing an S8700 media server, see the
Installation documentation on the Documentation for Avaya Communication
Manager, Media Gateways and Servers CD, 03-300151.

Assigning Node Names and IP Addresses for the C-LANs and LSPs

Note:
The CLAN boards must be TN799DP running version 5 or greater firmware. Be
Note:
sure to check the firmware version for these boards on the S8700. For
information on how to upgrade the firmware on the S8700, please see the section
"Upgrade Firmware in Selected Port Cabinet Packs" in Upgrading the Avaya
media server Configuration in the S8700 documentation portion of this
documentation CD, Documentation for Avaya Communication Manager, Media
Gateways and Servers CD, 03-300151.
To assign node names and IP addresses
1. At the SAT prompt, type change node-names ip to open the Node Names screen.
Example Node Names Screen
change node-names ip
Name
default_________
node-1-clan
node-2-clan
node-10-lsp
node-11-lsp
__________
__________
__________
2. Enter the name and IP address for the C-LANs and LSPs.
3. Press F3 (Enter) when complete.
IP NODE NAMES
IP Address
0__.0__.0__.0__
__ 192.168.1 _.124
192.168.1 _.97_
192.168.1 _.50_
192.168.1 _.51_
___.___.___. _
___.___.___. _
___.___.___. _
Administer Communication Manager
Name
_______________ ___.___.___.___
_______________ ___.___.___.___
_______________ ___.___.___.___
_______________ ___.___.___.___
_______________ ___.___.___.___
_______________ ___.___.___.___
_______________ ___.___.___.___
_______________ ___.___.___.___
Page 1 of 1
IP Address
Issue 8.1 June 2005 551