Upgrade of an existing S8300A to R3.0 with manual upgrade of G700 firmware
Post-upgrade tasks
Complete the following tasks after you have finished the upgrade:
If using IA770:
1.
Install and restart IA770
2.
Saving translations
3.
Installing IA770 service pack (or RFU) files and optional language files, if any
Complete the upgrade process (S8300 is the primary controller):
4.
To check media modules
5.
To enable scheduled maintenance
6.
To busy out trunks
7.
To check for translation corruption
8.
To resolve alarms
9.
To re-enable alarm origination
10.
To back up the system
11.
To restart LSPs (if any)
628 Installation and Upgrades for Avaya G700 Media Gateway and Avaya S8300 Media Server
on page 629
on page 635
on page 636
on page 636
on page 636
on page 637
on page 637
on page 637
on page 637
on page 637
on page 635