Performing A Data Dump - Avaya CS 1000E Upgrade Procedures

Page 116 of 226
Backing up the database (data dump)
NN43041-464 Standard 05.04
Upgrading a Call Server from CP PII to CP PIV
To back up system data, perform a data dump of backup data to a floppy disk.
Procedure 11

Performing a data dump

1 Log into the system.
2 Insert a floppy disk into the active Core/Net floppy drive to back up the
database.
3 Load the Equipment Data Dump Program (LD 43). At the prompt, enter:
LD 43
4 When "EDD000" appears on the terminal, enter:
EDD
CAUTION
Loss of Data
If the data dump is not successful, do not continue;
contact your technical support organization. A data
dump problem must be corrected before proceeding.
5 The messages "DATADUMP COMPLETE" and "DATABASE BACKUP
COMPLETE" will appear once the data dump is complete.
****
December 2011
Load program
Begin the data dump
Exit program