Restoring Power To The Server - Avaya S8730 Maintaining Manual

Restoring power to the server

The following graphic illustrates the S8730 server with two power supplies. Models 03 and 04
ship with a single power supply; model 05 ships with the illustrated duplicate power supply.
1. Plug one end of the power cord into the back of the server and connect the power
2. Plug the other end of the power cord into the UPS.
3. If the server does not start automatically within 15 seconds of the power cord being
4. If the server still does not start, verify that the server has AC power. Check the UPS
Maintaining the Avaya S8730 Server for Modular Messaging
cord anchor to the handle of the power supply.
connected, turn the server on by pressing the power button on the front of the server.
settings, and that the UPS is receiving AC power.
For more information about troubleshooting power problems, see Installing the
Avaya S8730 Server.
Restoring power to the server
June 2009 19