Upload Firmware To Rcp - D-Link DGS-3620-28PC-SI Product Manual

xStack® DGS-3620 Series Managed Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Unit
TFTP Server IP
Destination File
Source File
Click Upload to initiate the upload.

Upload Firmware to RCP

This window allows the user to upload firmware from the Switch to a RCP Server.
The fields that can be configured are described below:
Parameter
RCP Server IP
User Name
Source File
Destination File
Click Upload to initiate the upload.
Figure 12-8 Upload Firmware to TFTP window
Description
Use the drop-down menu to select a unit for uploading the firmware.
Enter the TFTP server IP address used.
Click the radio button to enter the TFTP server IP address used.
IPv4
Click the radio button to enter the TFTP server IPv6 address used.
IPv6
Click the radio button to enter the domain name.
Domain Name
Enter the location and name of the Destination File.
Enter the location and name of the Source File.
Figure 12-9 Upload Firmware to RCP window
Description
Enter the RCP Server IP Address used.
Enter the appropriate Username used.
Enter the location and name of the Source File.
Enter the location and name of the Destination File.
453