System Time and SNTP Settings
Simple Network Time Protocol Settings used to set system time are configured in two menus, the Time Settings and
Time Zone Settings menus.
Time Settings
This window is used to configure the time settings for the switch.
To view this window, click System Configuration > Time Settings (alternatively this menu is also displayed by
clicking the SNTP Settings link in the Quick Configuration menu in the Device Information page) as shown below:
The following parameters can be set or are displayed:
Parameter
SNTP State
Current Time
Time Source
SNTP First Server
SNTP Second Server
SNTP Poll Interval in
Seconds (30-99999)
Date (DD/MM/YYYY)
Time in (HH:MM:SS)
Click Apply to implement changes made.
DAS-3626 VDSL2 Switch User Manual
Figure 22. Time Settings menu
Description
Use the radius button to select an Enabled or Disabled SNTP state.
Displays the Current Time set on the switch.
Displays the time source for the system.
This is the IP address of the primary server the SNTP information will be taken from.
This is the IP address of the secondary server the SNTP information will be taken from.
This is the interval, in seconds, between requests for updated SNTP information.
Enter the current date in day, month and year to update the system clock.
Enter the current time in hours, minutes, and seconds.
Status
SNTP Settings
Set Current Time
19