Dns Relay Static Settings - D-Link xStack DES-3800 Series User Manual

The following fields can be set:
Parameter
DNS State
Primary Name Server
Secondary Name
Server
DNSR Cache Status
DNSR Static Table
State
Click Apply to implement changes made.

DNS Relay Static Settings

To view the DNS Relay Static Settings, click Layer 3 Features > DNS Relay > DNS Relay Static
Settings, which will open the DNS Relay Static Settings window, as seen below:
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch
Figure 8- 43. DNS Relay Global Settings window
Description
This field can be toggled between Disabled and Enabled using the pull-down menu,
and is used to enable or disable the DNS Relay service on the Switch.
Allows the entry of the IP address of a primary domain name server (DNS).
Allows the entry of the IP address of a secondary domain name server (DNS).
This can be toggled between Disabled and Enabled. This determines if a DNS cache
will be enabled on the Switch.
This field can be toggled using the pull-down menu between Disabled and Enabled.
This determines if the static DNS table will be used or not.
Figure 8- 44. DNS Relay Static Table
146