Wac Port Settings - D-Link xStack User Manual

xStack
RADIUS Authorization
Local Authorization
Click Apply to implement changes made.

WAC Port Settings

This window is used to enable and configure Web-based Access Control Port Settings on the Switch.
To view this window, click Security > Web Authentication > WAC Port Settings, as shown below:
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch
is 443. HTTPS cannot run at TCP port 80.
If no protocol is specified the protocol used is HTTP.
WAC Authorization Network Configuration
Specifies to Enable or Disable RADIUS Authorization.
Specifies to Enable or Disable Local Authorization.
247