Queue Bandwidth Control Settings - D-Link DWS-3160-24TC Reference Manual

DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide
Effective TX
Click the Apply button to accept the changes made.

Queue Bandwidth Control Settings

To view this window, click QoS > Bandwidth Control > Queue Bandwidth Control Settings, as shown below.
To view the following window, click QoS > Bandwidth Control > Queue Bandwidth Control Settings, as show
below:
The fields that can be configured are described below:
Parameter
From Port / To Port
From Queue / To Queue
Min Rate (64-1024000)
Max Rate (64-1024000)
Click the Apply button to accept the changes made.
NOTE: The minimum granularity of queue bandwidth control is 64Kbit/sec. The system will adjust the
number to the multiple of 64 automatically.
If a RADIUS server has assigned the TX bandwidth, then it will be the effective TX
bandwidth. The authentication with the RADIUS sever can be per port or per user. For
per user authentication, there may be multiple TX bandwidths assigned if there are
multiple users attached to this specific port. The final TX bandwidth will be the largest
one among these multiple TX bandwidths.
Figure 9-5 Queue Bandwidth Control Settings window
Description
Use the drop-down menu to select the port range to use for this configuration.
Use the drop-down menu to select the queue range to use for this configuration.
Specify the packet limit, in Kbps that the ports are allowed to receive. Tick the No
limit check box to have unlimited rate of packets received by the specified queue.
Enter the maximum rate for the queue. For no limit select the No Limit option.
137