Static Ipv6 Route Settings - D-Link DGS-3427 User Manual

Static IPv6 Route Settings

A static entry of an IPv6 address can be entered into the Switch's routing table for IPv6 formatted addresses. To view the
following window, click Administration > Routing Table > IPv6 Static Route.
This window shows the following values:
Parameter
IPv6 Address/Netmask
Gateway
Metric (1-65535)
Protocol
Delete
xStack DGS-3400 Series Fast Ethernet Switch
Figure 6- 29. IPv6 Static Route Settings list
Description
The IPv6 address and corresponding Subnet Mask of the IPv6 static route entry.
The corresponding IPv6 address for the next hop Gateway address in IPv6 format.
The metric of the IPv6 interface entered into the table representing the number of
routers between the Switch and the IPv6 address above. Metric values allowed are
between 1-65535.
Represents the status (default or static) for the IPv6 routing table entry.
Click the button if you would like to delete this entry from the list.
55