Hcf Front/Rear Spring - Xerox DocuColor 12/DCCS50 Service Manual

REP 2.8.35 HCF Front/Rear Spring
Parts List on PL 15.13
Removal
To avoid electrical shock, switch-OFF the Main Power Switch and disconnect the Power
Cord.
1. Remove the HCF Paper Tray Assembly
1. Remove the KL-clips and Bushings (2) at shaft ends
2. Remove the Retard Spring at rear
Replacement
1. Reverse the above procedures to replace the Front/Rear Spring.
High Capacity Feeder
REP 2.8.35
WARNING
(REP 2.7.5).
Figure 1 Removing the Front/Rear Spring
2. Remove the HCF Feeder Assembly
3. Remove the HCF Front/Rear Spring
3. Release the Spring from the Spring Stop
1/05
8a-22
manuals4you.com manuals4you.com
(REP 2.8.27).
(Figure 1).
4. Slide the shaft left/right to remove the Front/Rear Springs
DocuColor 12/DCCS50
Reissue