Bin 3 Full Stack Rap; Bin 4 Full Stack Rap - Xerox DocuColor 12/DCCS50 Service Manual

11-913 Bin 3 Full Stack RAP

The Control Logic detected that Bin 3 is full.
Initial Actions
• Refer to BSD12.9 for the following procedure.
• Ensure that Bin 3 is empty
Procedure
Enter dC330 012-283 Bin 3 Full Sensor. Press Start. Manually move the actuator in and out of
the sensor The display Changes from H to L to H as the actuator is moved in and out of
the sensor.
Y N
Press Stop. +5VDC is measured between P/J1002-3 and DC COM on the Mailbox
PWB.
Y N
+5VDC is measured between P/J1031-9 and DC COM on the Finisher PWB.
Y N
Replace the Finisher PWB
Go to Flag 3 on BSD12.9 and check the wires for an open circuit.
Replace the Mailbox PWB (PL 18.11).
Check the Bin 3 Full Sensor for intermittent operation. If the problem continues, replace the
Mailbox PWB (PL 18.11).
Finisher/Sorter
11-913 Bin 3 Full Stack RAP, 11-914 Bin 4 Full Stack
(PL 18.4).

11-914 Bin 4 Full Stack RAP

The Control Logic detected that Bin 4 is full.
Initial Actions
• Refer to BSD12.9 for the following procedure.
• Ensure that Bin 4 is empty
Procedure
Enter dC330 012-284 Bin 4 Full Sensor. Press Start. Manually move the actuator in and out of
the sensor The display Changes from H to L to H as the actuator is moved in and out of
the sensor.
Y N
Press Stop. +5VDC is measured between P/J1002-4 and DC COM on the Mailbox
PWB.
Y N
+5VDC is measured between P/J1031-8 and DC COM on the Finisher PWB.
Y N
Replace the Finisher PWB
Go to Flag 4 on BSD12.9 and check the wires for an open circuit.
Replace the Mailbox PWB
Check the Bin 4 Full Sensor for intermittent operation. If the problem continues, replace the
Mailbox PWB (PL 18.11).
1/05
8d-28
manuals4you.com manuals4you.com
(PL 18.4).
(PL 18.11).
DocuColor 12/DCCS50
Reissue