Bin 7 Full Stack Rap; Bin 8 Full Stack Rap - Xerox DocuColor 12/DCCS50 Service Manual

11-917 Bin 7 Full Stack RAP

The Control Logic detected that Bin 7 is full.
Initial Actions
• Refer to BSD12.9 for the following procedure.
• Ensure that Bin 7 is empty
Procedure
Enter dC330 012-287 Bin 7 Full Sensor. Press Start. Manually move the actuator in and out of
the sensor The display Changes from H to L to H as the actuator is moved in and out of
the sensor.
Y N
Press Stop. +5VDC is measured between P/J1002-7 and DC COM on the Mailbox
PWB.
Y N
+5VDC is measured between P/J1031-5 and DC COM on the Finisher PWB.
Y N
Replace the Finisher PWB
Go to Flag 7 on BSD12.9 and check the wires for an open circuit.
Replace the Mailbox PWB (PL 18.11).
Check the Bin 7 Full Sensor for intermittent operation. If the problem continues, replace the
Mailbox PWB (PL 18.11).
Finisher/Sorter
11-917 Bin 7 Full Stack RAP, 11-918 Bin 8 Full Stack
(PL 18.4).

11-918 Bin 8 Full Stack RAP

The Control Logic detected that Bin 8 is full.
Initial Actions
• Refer to BSD12.9 for the following procedure.
• Ensure that Bin 8 is empty
Procedure
Enter dC330 012-288 Bin 8 Full Sensor. Press Start. Manually move the actuator in and out of
the sensor The display Changes from H to L to H as the actuator is moved in and out of
the sensor.
Y N
Press Stop. +5VDC is measured between P/J1002-8 and DC COM on the Mailbox
PWB.
Y N
+5VDC is measured between P/J1031-4 and DC COM on the Finisher PWB.
Y N
Replace the Finisher PWB
Go to Flag 8 on BSD12.9 and check the wires for an open circuit.
Replace the Mailbox PWB
Check the Bin 8 Full Sensor for intermittent operation. If the problem continues, replace the
Mailbox PWB (PL 18.11).
1/05
8d-30
manuals4you.com manuals4you.com
(PL 18.4).
(PL 18.11).
DocuColor 12/DCCS50
Reissue