Nat Settings; Dtmf Methods; Preferred Vocoder (Codec); Configuring The Ht801 Through Voice Prompts - Grandstream Networks HT801 User Manual

NAT Settings

If you plan to keep the Handy Tone within a private network behind a firewall, we recommend using STUN
Server. The following three settings are useful in the STUN Server scenario:
1. STUN Server (under advanced settings webpage) Enter a STUN server IP (or FQDN) that you may
have, or look up a free public STUN Server on the internet and enter it on this field. If using Public IP,
keep this field blank.
2. Use Random SIP/RTP Ports (under advanced settings webpage) This setting depends on your
network settings. Generally, if you have multiple IP devices under the same network, it should be set
to Yes. If using a public IP address, set this parameter to No.
3. NAT traversal (under the FXS web page) Set this to Yes when gateway is behind firewall on a private
network.

DTMF Methods

The HT801 support the following DTMF mode:

DTMF in-audio

DTMF via RTP (RFC2833)

DTMF via SIP INFO
Set priority of DTMF methods according to your preference. This setting should be based on your server
DTMF setting.

Preferred Vocoder (Codec)

The HT801 supports following voice codecs. On FXS port page, choose the order of your favorite codecs:

PCMU/A (or G711µ/a)

G729 A/B

G723.1

G726 (16/24/32/40)

iLBC

OPUS

Configuring The HT801 Through Voice Prompts

As mentioned previously, The HT801 has a built-in voice prompt menu for simple device configuration.
Please refer to "Understanding HT801 Interactive Voice Prompt Response
about IVR and how to access its menu.
 DHCP MODE
Select voice menu option 01 to allow the HT801 to use DHCP.
 STATIC IP MODE
Select voice menu option 01 to allow the HT801 to enable the STATIC IP mode, then use option 02, 03,
HT801 User Guide
Menu" for more information
P a g e | 19