Reset A Nd Reboot; Syslog; Figure 187: Reset And Reboot - Grandstream Networks UCM6100 Series User Manual
Ip pbx
Hide thumbs
Also See for UCM6100 Series:
- User manual (418 pages) ,
- Manual manual (24 pages) ,
- Configuration (19 pages)
Table of Contents
Advertisement
--------------------------------------------------------------------------------------------------------------------------------------------
Note:
Cleaner will delete data based on Recording Storage selection. If USB Disk is selected, Cleaner will only
clean data in USB and local data will leave untouched. If Enable auto change is selected and USB disk is
connected, Cleaner will only delete data in USB drive. Recordings Storage function can be found under
web UI-> Settings-> Recordings Storage-> Recordings Storage.
--------------------------------------------------------------------------------------------------------------------------------------------
RESET
A ND
R EBOOT
Users could perform reset and reboot under Web GUI->Maintenance->Reset and Reboot.
To factory reset the device, select the mode type first. There are two different types for reset.
User Data: All the data including voicemail, recordings, IVR Prompt, Music on Hold, CDR and backup
•
files will be cleared.
All: A ll the configurations and data will be reset to factory default.
•
SYSLOG
On the UCM6100, users could dump the syslog information to a remote server under Web
GUI->Maintenance->Syslog. Enter the syslog server hostname or IP address and select the module/level
for the syslog information.
Firmware Version 1.0.9.26
Figure 187: Reset and Reboot
UCM6100 Series IP PBX User Manual
Page 297 of 304
Advertisement
Table of Contents
Troubleshooting
