Blf  And  Event  List; Blf; Event  List; Table  74:  Event  List  Settings - Grandstream Networks UCM6100 Series User Manual

Ip pbx
Hide thumbs Also See for UCM6100 Series:
Table of Contents

Advertisement

BLF  
 
The   UCM6100   supports   BLF   monitoring   for   extensions,   ring   group,   call   queue,   conference   room   and  
parking  lot.  For  example,  on  the  user's  phone,  configure  the  parking  lot  number  701  as  the  BLF  monitored  
number.  When  there  is  a  parked  call  on  701,  the  LED  for  this  BLF  key  will  light  up  in  red,  meaning  a  call  is  
parked  against  this  parking  lot.  Pressing  this  BLF  key  can  pick  up  the  call  from  this  parking  lot.  
 
 
-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­  
 
Note:  
On  the  Grandstream  GXP  series  phones,  the  MPK  supports  "Call  Park"  mode,  which  can  be  used  to  park  
the  call  by  configuring  the  MPK  number  as  call  park  feature  code  (e.g.,  700).  MPK  "Call  Park"  mode  can  
also  be  used  to  monitor  and  pickup  parked  call  if  the  MPK  number  is  configured  as  parking  lot  (e.g.,  701).  
-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­  
 
 
EVENT   L IST  
 
Besides  BLF,  users  can  also  configure  the  phones  to  monitor  event  list.  In  this  way,  both  local  extensions  
on  the  same  UCM6100  and  remote  extensions  on  the  VOIP  trunk  can  be  monitored.  The  event  list  setting  
is  under  web  GUI-­>Call  Features-­>Event  List.  
 
Click  on  "Create  New  Event  List"  to  add  a  new  event  list.  
•  
Click  on  
  to  edit  the  event  list  configuration.  
•  
Click  on  
  to  delete  the  event  list.  
•  
URI  
Local  Extensions  
Remote  Extensions  
Firmware  Version  1.0.9.26  
 
BLF   A ND   E VENT   L IST  
Table  74:  Event  List  Settings  
Configure   the   name   of   this   event   list   (for   example,   office_event_list).  
Please  note  the  URI  name  cannot  be  the  same  as  the  extension  name  on  
the  UCM6100.  The  valid  characters  are  letters,  digits,  _  and  -­.  
Select   the   available   extensions/Extension   Groups   listed   on   the   local  
UCM6100  to  be  monitored  in  the  event  list.  
If  LDAP  sync  is  enabled  between  the  UCM6100  and  the  peer  UCM6100,  
the  remote  extensions  will  be  listed  under  "Available  Extensions".  If  not,  
UCM6100  Series  IP  PBX  User  Manual  
 
 
Page  230  of  304    

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents