Paging And Intercom Group; Configure Paging/Intercom Group; Table 67: Paging/Intercom Group Configuration Parameters; Figure 116: Paging/Intercom Group - Grandstream Networks UCM6100 Series User Manual

Paging and Intercom Group can be used to make an announcement over the speaker on a group of
phones. Targeted phones will answer immediately using speaker. The UCM6100 paging and intercom can
be used via feature code to a single extension or a paging/intercom group. This sections describes the
configuration of paging/intercom group under Web GUI-­>PBX-­>Call Features-­>Paging/Intercom.
CONFIGURE P AGING/INTERCOM G ROUP
Click on "Create New Paging/Intercom Group" to add paging/intercom group.
•
Name
Extension
Type
Custom Prompt
Page/Intercom Group
Members
Firmware Version 1.0.9.26
PAGING A ND I NTERCOM G ROUP
Figure 116: Paging/Intercom Group
Table 67: Paging/Intercom Group Configuration Parameters
Configure paging/intercom group name.
Configure the paging/intercom group extension.
Select "2-­way Intercom" or "1-­way Page".
This option is to set a custom prompt for a paging/intercom group to
announce to caller. Click on 'Prompt', it will direct to the page
PBX-­>Internal Options-­>Custom Prompt, where users could record
new prompt or upload prompt files.
Select available users from the left side to the paging/intercom group
member list on the right.
UCM6100 Series IP PBX User Manual Page 202 of 304