Music On Hold
Skip A uthentication When
Inviting User via Trunk from
Web GUI
JOIN
A
C ONFERENCE
C ALL
Users could dial the conference bridge extension to join the conference. If password is required, enter the
password to join the conference as a normal user, or enter the admin password to join the conference as
administrator.
INVITE
O THER
P ARTIES
T O
J OIN
C ONFERENCE
When using the UCM6100 conference bridge, there are two ways to invite other parties to join the
conference.
Invite from Web GUI.
•
For each conference bridge in UCM6100 Web GUI->PBX->Call Features->Conference, there is an icon
for option "Invite a participant". Click on it and enter the number of the party you would like to invite.
Then click on "Add". A call will be sent to this number to join it into the conference.
Invite by dialing 0 or 1 during conference call.
•
A conference participant can invite other parties to the conference by dialing from the phone during the
conference call. Please make sure option "Enable User Invite" is turned on for the conference bridge first.
Firmware Version 1.0.9.26
in the conference. The default setting is "No".
Select the music on hold class to be played in conference call. Music On
Hold class can be set up under web UI->PBX->Internal Options->Music
On Hold.
If enabled, the invitation from Web GUI for a conference bridge with
password will skip the authentication for the invited users. The default
setting is "No".
Figure 101: Conference Invitation From Web GUI
UCM6100 Series IP PBX User Manual
Page 180 of 304