Figure 81: Manage Extensions - Grandstream Networks UCM6100 Series User Manual

Status
•
Users can see the following icon for each extension to indicate the SIP status.
Green:
Blue:
Yellow:
Grey:
Edit single extension
•
Click on to start editing the extension parameters.
Reboot the user
•
Click on to send NOTIFY reboot event to the device which has an UCM6100 extension already
registered. To successfully reboot the user, "Zero Config" needs to be enabled on the UCM6100 web
GUI-­>PBX-­>Zero Config-­>Auto Provisioning Settings.
Delete single extension
•
Click on to delete the extension. Or select the checkbox of the extension and then click on "Delete
Selected Extensions".
Modify selected extensions
•
Select the checkbox for the extension(s). Then click on "Modify Selected Extensions" to edit the
extensions in a batch.
Delete selected extensions
•
Select the checkbox for the extension(s). Then click on "Delete Selected Extensions" to delete the
extension(s).
Firmware Version 1.0.9.26
Figure 81: Manage Extensions
Free
Ringing
In Use
Unavailable (the extension is not registered or disabled on the PBX)
UCM6100 Series IP PBX User Manual Page 142 of 304