Concluding Steps - Fujitsu PRIMERGY TX300 S7 Upgrade And Maintenance Manual

Expansion cards and backup units
Figure 317: Routing the BBU cable
Ê Run the BBU cable through the cable guide (G) and along the drive bays as
shown.
9.6.2.5

Concluding steps

Perform the following procedures to complete the task:
Ê Reinstall the system fan holder as described in section
fan holder" on page
Ê Reinstall the air duct as described in section
on page 94.
Ê Close the side / top cover as described in section
on page 107 (rack server) or
server).
494
379.
"Mounting the side cover" on page 114
Upgrade and Maintenance Manual
"Installing the system
"Installing the system air duct"
"Mounting the top cover"
TX300 S7 / RX350 S7
(tower