Concluding Steps - Fujitsu PRIMERGY TX300 S7 Upgrade And Maintenance Manual

Hard disk drives / solid state drives
Figure 152: Closing the 3.5-inch HDD module locking lever
Ê Fold down the lever to lock the HDD module in place.
7.3.6.5

Concluding steps

Perform the following procedures to complete the task:
Ê When working on a tower server, close the HDD bay cover as described in
section "Installing accessible drive and HDD bay covers" on page
Ê Please observe the notes on RAID rebuild in section
array rebuild" on page
266
157.
Upgrade and Maintenance Manual
111.
"Performing a RAID
TX300 S7 / RX350 S7