Cabling; List Of Used Cables - Fujitsu PRIMERGY TX300 S7 Upgrade And Maintenance Manual

16

Cabling

Safety notes
V
CAUTION!
Always hold cables by their connectors when disconnecting them.
●
Never pull on the cable to disconnect cables.
Ensure that none of the cables are scraped, strained or otherwise
●
damaged while replacing system components.
Immediately replace cables with damaged shielding.
●
Always use shielded network cables.
●
16.1

List of used cables

I
The numbers in the cable list correspond to those shown in the cabling
plans below.
No. Name
1 HDD Power Cable
2 PSU Signal Cable
HDD / ODD Power
3
Cable
4 System Power Cable
Backup Drive Power
5
Cable
ODD SATA Power
6
Cable
SAS Backup Drive
7
Power / Data cable
Table 6: List of used cables
TX300 S7 / RX350 S7
Number
Length
(T26139-)
750 / 550 /
Y3952-V601
450 mm
300 mm Y4027-V1
410 mm Y4029-V201
500 mm Y3758-V9
410 mm Y4029-V1
410 mm Y3930-V601
410 / 700
Y3969-V401
mm
Upgrade and Maintenance Manual
Routing
Power backplane to SAS
backplanes / HDD
extension box
Power backplane to
system board
SAS backplane to HDD
extension box or system
board
Power backplane to
system board
Backup drive to system
board or power backplane
ODD to SAS backplane
SAS Backup drive to
system board connector
SAS 1-4
849