Assembly Rules; Psu Indicator - Fujitsu PRIMERGY TX300 S7 Upgrade And Maintenance Manual

Power supply
6.1.2

Assembly rules

– Mixed assembly of 450 W and 800 W PSU modules is not possible.
– PSU slots 1 or 2 always need to be equipped with a PSU module.
– Always install dummy modules into unused PSU slots to comply with
applicable EMC regulations and satisfy cooling requirements.
6.1.3

PSU indicator

Figure 72: PSU indicator
Indicator
PSU operating
1
status
166
Status Description
Server is switched on and functioning
green on
properly
green Server is switched off, main voltage is
flashing present (Standby mode)
PSU failure (over / under voltage, over
orange on
temperature or fan failure)
orange
Overload warning
flashing
Upgrade and Maintenance Manual
TX300 S7 / RX350 S7