Closing The Server; Rack Model; Installing The Rack Mounting Frame - Fujitsu PRIMERGY TX300 S7 Upgrade And Maintenance Manual

Basic hardware procedures
4.9

Closing the server

V
CAUTION!
Before attaching the covers, make sure no unnecessary parts or tools
●
are left inside the server.
In order to comply with applicable EMC regulations (regulations on
●
electromagnetic compatibility) and satisfy cooling requirements, the
PRIMERGY TX300 S7 / RX350 S7 server must not run while the
top / side cover is removed.
For further safety information, please refer to chapter
●
information" on page
4.9.1

Rack model

4.9.1.1

Installing the rack mounting frame

Figure 43: Installing the rack mounting frame (A)
Ê Fit the rack mounting frame on the server front.
104
47.
Upgrade and Maintenance Manual
"Important
TX300 S7 / RX350 S7