14.3
Trusted Platform Module (TPM)
This section provides information on how to install, remove or replace the
Trusted Platform Module (TPM).
14.3.1 Installing the TPM board
Upgrade and Repair Units (URU)
Average hardware task duration: 5 minutes
Average software task duration: 5 minutes
14.3.1.1 Required tools
Preliminary and concluding steps:
●
– Phillips PH2 / (+) No. 2 screw driver
Installing the TPM:
●
– Bit screw driver
– TPM bit insert
(
)
*
For the Japanese market:
– TPM module fixing tool (S26361-F3552-L909)
14.3.1.2 Preliminary steps
Before installing the TPM board, perform the following steps:
Ê Disable BitLocker functionality as described in section
functionality" on page
Ê Locate the desired server as described in section
server" on page
Ê Shut down the server as described in section
page
67.
TX300 S7 / RX350 S7
(
)
*
133.
60.
Upgrade and Maintenance Manual
System board and components
"Disabling BitLocker
"Locating the defective
"Shutting down the server" on
773