Fujitsu PRIMERGY TX300 S7 Upgrade And Maintenance Manual page 445

Figure 280: Connecting GPGPU power cables to the power backplane
Ê Connect the GPGPU power cables to the power backplane:
# Connector Cable
1 X22
2 X23
Ê Mount the system board carrier as described in section
system board carrier" on page
V
CAUTION!
Ensure not to trap or pinch any cables running through the cable exit
from the power backplane.
Ê Reinstall the system board as described in section
board" on page
TX300 S7 / RX350 S7
GPGPU card power cable T26139-Y3946-V701
101.
803.
Upgrade and Maintenance Manual
Expansion cards and backup units
"Installing the system
"Installing the
445