Removing The Sas Expander Board - Fujitsu PRIMERGY TX300 S7 Upgrade And Maintenance Manual

7.5.2.3

Removing the SAS expander board

Figure 230: Installing accessible drive covers
Ê Loosen the captive knurled thumb screw on the SAS expander board (1).
Ê Slide the expander board to the left as far as it will go (2).
The shoulder screw caps on the expander board spacer bolts will rest in the
wide ends of the keyhole slots on the spacer board (see close-up).
TX300 S7 / RX350 S7
Upgrade and Maintenance Manual
Hard disk drives / solid state drives
365