Hard disk drives / solid state drives
7.3.6
Installing 3.5-inch HDD modules
Customer Replaceable Units (CRU)
Average task duration: 5 minutes
7.3.6.1
Required tools
Preliminary and concluding steps: tool-less
●
Installing a 3.5-inch HDD module: tool-less
●
7.3.6.2
Preliminary steps
Before installing a 3.5-inch HDD module, perform the following steps:
Ê When working on a tower server, open the HDD bay cover as described in
section
"Removing accessible drive and HDD bay covers" on page
Ê Locate the correct drive bay as described in section
configurations" on page
262
250.
Upgrade and Maintenance Manual
87.
"3.5-inch HDD
TX300 S7 / RX350 S7