Concluding Software Tasks - Fujitsu PRIMERGY TX300 S7 Upgrade And Maintenance Manual

Expansion cards and backup units
9.3.1.7

Concluding software tasks

If the Modular LAN controller is to be used as a shared LAN interface, please
proceed as follows:
Ê Ensure that the NCSI cable has been connected to the Modular LAN
controller and the system board as described in sections
NCSI sideband cable to the Modular LAN controller" on page 422
"Connecting the NCSI sideband cable to the system board" on page
Ê Enter the BIOS.
Ê Select the Server Mgmt menu.
Ê Under iRMC LAN Parameters Configuration set the Management LAN Port
setting to Shared 2.
Ê Save your changes and exit the BIOS.
I
For detailed information on how to access the BIOS and modify settings,
refer to the "System Board D2949 BIOS Setup Utility" reference manual.
The document is available online at
(http://jp.fujitsu.com/platform/server/primergy/manual/
market) or from the ServerView Suite DVD 2 supplied with your
PRIMERGY server.
430 Upgrade and Maintenance Manual
http://manuals.ts.fujitsu.com
for the Japanese
TX300 S7 / RX350 S7
"Connecting the
and
428.