Locating The Defective Server - Fujitsu PRIMERGY TX300 S7 Upgrade And Maintenance Manual

Hide thumbs Also See for PRIMERGY TX300 S7:

Table of Contents

Basic hardware procedures

Locating the defective server

Figure 2: ID button and ID indicator on front panel

Figure 3: ID indicator on connector panel

When working in a datacenter environment, switch on the ID indicator on the

front and rear connector panels of the server for easy identification.

Ê Press the ID button on the front panel (1) or use the ServerView Operation

Manager user interface to switch on the system ID indicator LEDs (2).

For further information, refer to the "ServerView Suite Local Service

Concept (LSC)" manual available from the ServerView Suite DVD 2

supplied with your PRIMERGY server or online at

http://manuals.ts.fujitsu.com

http://jp.fujitsu.com/platform/server/primergy/manual/(Japanese

Ê When using ServerView Operations Manager to toggle the ID indicator,

choose Single System View and press the Locate button.

Ê Remember to switch off the ID indicator after the maintenance task has been

concluded successfully.

(EMEA market) or

Upgrade and Maintenance Manual

TX300 S7 / RX350 S7

Primergy tx350 s7