Removing A 2.5-Inch Hdd / Ssd Module - Fujitsu PRIMERGY TX300 S7 Upgrade And Maintenance Manual

Hard disk drives / solid state drives
In order to permanently remove an operational HDD module that is part of a
RAID array from the server, you first need to delete the array using
ServerView RAID Manager.
V
CAUTION!
All data on all HDDs / SSDs in the array will be lost! Be sure to back
up your data before deleting a RAID array.
For further information, please refer to the "ServerView Suite RAID
Management" user guide, available online at
(http://jp.fujitsu.com/platform/server/primergy/manual/
market) or from the ServerView Suite DVD 2 supplied with your PRIMERGY
server.
Ê When working on a tower server, open the HDD bay cover as described in
section "Removing accessible drive and HDD bay covers" on page
7.2.6.3

Removing a 2.5-inch HDD / SSD module

Figure 102: Disconnecting a 2.5-inch HDD / SSD module
212 Upgrade and Maintenance Manual
http://manuals.ts.fujitsu.com
for the Japanese
TX300 S7 / RX350 S7
87.