Installing An Accessible Drive - Fujitsu PRIMERGY TX300 S7 Upgrade And Maintenance Manual

Accessible drives

12.2.4 Installing an accessible drive

Figure 393: Checking mounting bracket positions (Example: ODD installation, bay 1)
Ê Ensure that the four mounting brackets in the desired accessible drive bay
have not been bent out. If necessary, proceed as follows:
Ê Using a screw driver, bend the mounting brackets of the upper
installation bay inwards, so that their sides are flush with the bay walls
(see close-up).
Ê Bend down the upper two mounting brackets (see blue circles).
Ê Bend up the lower two mounting brackets (see orange circles).
604 Upgrade and Maintenance Manual
TX300 S7 / RX350 S7