Applying Thermal Paste - Fujitsu PRIMERGY TX300 S7 Upgrade And Maintenance Manual

11.6

Applying thermal paste

Field Replaceable Units (FRU)
Average task duration: 5 minutes
I
– For the Japanese market, the service engineer must follow the
instruction provided separately.
– If the processor upgrade or replacement kit contains a new CPU heat
sink, a thin layer of thermal compound has already been pre-applied
to its lower surface. In this case, please proceed with section
"Installing processor heat sinks" on page
Figure 386: Thermal paste syringe TC-5026
One thermal compound syringe (A3C40142460 / 34035576) contains thermal
paste for two processors.
TX300 S7 / RX350 S7
Upgrade and Maintenance Manual
Processors
588.
595