Installing The Processor - Fujitsu PRIMERGY TX300 S7 Upgrade And Maintenance Manual

Hide thumbs Also See for PRIMERGY TX300 S7:

Table of Contents

Processors are extremely sensitive to electrostatic discharge and

must be handled with care. After a processor has been removed from

its protective sleeve or from its socket, place it upside down on a

nonconducting, antistatic surface. Never push a processor over a

11.4.3.2 Installing the processor

Figure 375: Installing the processor

Ê Hold the processor with your thumb and index finger.

Ê Make sure that the four notches on the processor align with the posts on the

socket (see close-up).

Upgrade and Maintenance Manual

TX300 S7 / RX350 S7

Primergy tx350 s7