Concluding Steps - Fujitsu PRIMERGY TX300 S7 Upgrade And Maintenance Manual

Figure 293: Installing the secondary GPGPU card
Ê If applicable, insert the second GPGPU card into PCI slot 6 and press down
firmly until it is fully seated in the slot (1).
Ê Secure and cable the second GPGPU card accordingly (2 and 3).
I
For easier access to the securing screw, remove the system fan
holder first (see section
page 378).
9.4.1.8

Concluding steps

Perform the following procedures to complete the task:
Ê Reinstall the air duct as described in section
on page 94.
Ê Close the side / top cover as described in section
on page 107 (rack server) or
server).
Ê When working on a rack-mounted server, secure it in the rack as described
in section "Sliding the server into the rack" on page
TX300 S7 / RX350 S7
"Removing the system fan holder" on
"Mounting the side cover" on page 114
Upgrade and Maintenance Manual
Expansion cards and backup units
"Installing the system air duct"
"Mounting the top cover"
124.
(tower
457